Solution behavior of linear-dendritic rod diblock copolymers in methanol

The solution behavior of spherical dendrimers as well as hybrid-linear dendritic diblock copolymers has been extensively studied, and the size, shape, and ability of these polymers to encapsulate small molecules have led to their comparison with traditional micelles. We have recently reported the synthesis of a new dendritic copolymer architecture, the linear-dendritic rod diblock copolymer, and in this work, we examine the solution behavior of these unique polymers in methanol at 25 degrees C, using dynamic light scattering and intrinsic viscosity measurements. The diblock copolymers consist of a linear poly(ethylene oxide)-poly(ethylene imine) diblock copolymer backbone around which poly(amido amine) branches have been divergently synthesized from the poly(ethylene imine) block. The hydrodynamic radii and the viscometric radii of the polymers were found to increase slowly with increasing generation up to generation 3.5; however, after generation 3.5, the radii were found to increase very rapidly. This increase can be explained by an elongation of the dendritic block into a more rodlike configuration and a corresponding breakdown of the spherical approximation used to calculate the radii. The intrinsic viscosity of the amine and ester terminated polymers was found to follow two very different trends at low generation; however, at higher generations, they followed similar, yet slightly different, curves with the values for the amine terminated polymers only a little larger than those of the ester terminated polymers. At low generations, the chemistry of the end groups and its interaction with the solvent were found to be more important, whereas at higher generations, the highly branched nature of the dendritic block was the more important factor. For the ester terminated polymers, a maximum in the intrinsic viscosity occurred at generation 1.5. Since this maximum occurred at a much lower generation number than is traditionally seen for spherical dendrimers, new scaling relations for the intrinsic viscosity of dendritic rod polymers were developed and were found to support this observation. A minimum in the intrinsic viscosity was also observed at generation 3.5 for the ester terminated polymers and a minimum or leveling off in the intrinsic viscosity at generation 4.0 was found for the amine terminated polymers, which can be attributed to the transitioning of the polymers to a more elongated, rodlike shape and the increased influence of the shape factor on the intrinsic viscosity.     

空间频率域超声背散射参量用于骨质状况的评价*

在超声背散射骨质评价中,不同测量感兴趣区域(ROI)的超声背散射信号会有波动,致使诊断准确度降低。该文目的是研究超声背散射信号随测量区域的变化规律。采用空间扫描方法离体测量了35块骨样本,将超声背散射参数从空间域变换到空间频率域。结果表明,超声背散射参数的主要空间频率成分集中于低频部分;空间频率域超声背散射参量最大值(MASF)与骨矿密度等参数具有中高度显著相关性(R2=0.45~0.83,p0.001);空间频率域超声背散射参量衰减系数(AC)也与松质骨密度及结构特征有显著相关性(R2=0.41~0.72,p0.001)。研究表明空间频率域变换方法有助于明确超声背散射信号随测量ROI的变化规律,空间频率域的超声背散射相关新参量评价松质骨状况具有可行性。     

2-羟基-1-萘甲醛缩-2-萘甲酰腙对Zn2+的选择性识别

设计合成了识别Zn²⁺的荧光传感分子--2-羟基-1-萘甲醛缩-2-萘甲酰腙(3)。 通过红外光谱、核磁共振谱和质谱测试技术表征了其结构。 利用其光谱性质研究了该物质对几种过渡金属离子的识别性质,初步探讨了其结合模式。 结果表明,在乙腈介质中,受体分子3表现出对Zn²⁺良好的选择性,Zn²⁺的加入导致受体分子3的吸收光谱在435 nm处出现1新峰,其吸光度逐渐增强,同时于239、302、330、342和387 nm处观察到5个清晰的等吸收点;在516 nm处荧光增强101倍,而其它过渡金属只引起受体分子]3的荧光略微增强。 Job法实验揭示受体分子3与Zn²⁺的结合比为1∶1。     

Critical fluctuations and quenched disordered two-dimensional charge stripes in La(5/3)Sr(1/3)NiO4

Using high-resolution x-ray scattering, we have demonstrated the existence of quenched disordered charge stripes in a single crystal of La (5/3)Sr (1/3)NiO (4) at low temperatures. Above the second-order transition critical scattering was observed due to fluctuations into the charge stripe phase. The charge stripes are shown to be two dimensional in nature both by measurements of their correlation lengths (xi(a) approximately 185 A, xi(b) = 400 A, and xi(c) approximately 25 A) and by the critical exponents of the charge strip transition. The charge stripe ordering did not develop long-range order even at low temperatures, indicating that the charge stripes are disordered and that the length scale of the disorder is quenched.     

Nanostructured copper phthalocyanine-sensitized multiwall carbon nanotube films

We report a detailed study of the interaction between surface-oxidized multiwall carbon nanotubes (o-MWCNTs) and the molecular semiconductor tetrasulfonate copper phthalocyanine (TS-CuPc). Concentrated dispersions of o-MWCNT in aqueous solutions of TS-CuPc are stable toward nanotube flocculation and exhibit spontaneous nanostructuring upon rapid drying. In addition to hydrogen-bonding interactions, the compatibility between the two components is shown to result from a ground-state charge-transfer interaction with partial charge transfer from o-MWCNT to TS-CuPc molecules orientated such that the plane of the macrocycle is parallel to the nanotube surface. The electronegativity of TS-CuPc as compared to unsubsubtituted copper phthalocyanine is shown to result from the electron-withdrawing character of the sulfonate substituents, which increase the molecular ionization potential and promote cofacial molecular aggregation upon drying. Upon spin casting to form uniform thin films, the experimental evidence is consistent with an o-MWCNT scaffold decorated with phthalocyanine molecules self-assembled into extended aggregates reminiscent of 1-D linearly stacked phthalocyanine polymers. Remarkably, this self-organization occurs in a fraction of a second during the spin-coating process. To demonstrate the potential utility of this hybrid material, it is successfully incorporated into a model organic photovoltaic cell at the interface between a poly(3-hexylthiophene):[6,6]-phenyl-C61 butyric acid methyl ester bulk heterojunction layer and an indium-tin oxide-coated glass electrode to increase the light-harvesting capability of the device and facilitate hole extraction. The resulting enhancement in power conversion efficiency is rationalized in terms of the electronic, optical, and morphological properties of the nanostructured thin film.     

Temperature dependence of aggregation and dynamic surface tension in a photoresponsive surfactant system

The response of a nonionic photoresponsive surfactant system to changes in temperature is reported. This surfactant contains the light-sensitive azobenzene group, and when exposed to light, a solution of this surfactant contains a mixture of the cis and trans photoisomers of this group. The temperature of the surfactant solution has a strong impact on the time needed for the surfactant to diffuse and adsorb to a freshly formed interface. At surfactant concentrations that give rise to trans aggregates but not to cis aggregates, the transport of cis and of trans isomers to the surface of a pendant bubble have quite different temperature dependencies, owing largely to the difference in their aggregation states in bulk solution. Diffusion and adsorption of the cis isomer are described reasonably well by a simple diffusion model that accounts for the effect of temperature on the diffusion coefficient. The trans isomer, which was primarily bound in aggregates during these measurements, exhibits a stronger dependence of this adsorption time scale on the temperature of the solution. This temperature dependence of trans diffusion and adsorption is quantitatively consistent between samples containing only the trans isomer and samples containing a mixture of isomers. Fluorescence studies were done to determine the effect of temperature on the cmc of the surfactant. The critical concentration associated with the formation of cis-dominant aggregates increases modestly with increasing temperature. The cmc of the trans isomer also increases with increasing temperature, most significantly when the temperature exceeds about 35 degrees C. These trans cmc temperature-dependence data were incorporated into diffusion models that account for the potential roles of aggregates in the adsorption process. The observed temperature dependency of the trans adsorption time scale is consistent with a model that includes the effect of temperature on both the diffusivity and the supply of monomer via its effect on the cmc. Specifically, the results suggest that the dissolution of trans-dominant aggregates is important to the trans adsorption process. Further fluorescence studies were performed in which surfactant solutions containing aggregates were diluted rapidly, and the rate of dissolution of these aggregates was inferred from fluorescence decay. Aggregate breakup in colder trans samples is slower than in warmer samples, but these dissolution time scales are significantly shorter than those associated with the adsorption process. This is consistent with the assumption that aggregation kinetics do not contribute to the observed adsorption kinetics.     

Phase Transitions in a Highly Anisotropic Antiferromagnetic Heisenberg Toda Chain

The behavior of the antiferromagnetic spin 112 Heisenberg Toda chain is investigated in a space of interactions which include exchange anisotropy, bond alternation and Toda-like spinlattice coupling by means of coherent-state for spin. We analyse magnetically driven lattice instabilities and find that multiphase structure only occurs under the condition, of bond alternation. Three phase diagrams and tricritical points are obtained and some relevant physical properties are discussed.     

Antiviral properties of polymeric aziridine- and biguanide-modified core-shell magnetic nanoparticles

Polycationic superparamagnetic nanoparticles (～150-250 nm) were evaluated as virucidal agents. The particles possess a core-shell structure, with cores consisting of magnetite clusters and shells of functional silica covalently bound to poly(hexamethylene biguanide) (PHMBG), polyethyleneimine (PEI), or PEI terminated with aziridine moieties. Aziridine was conjugated to the PEI shell through cationic ring-opening polymerization. The nanometric core-shell particles functionalized with biguanide or aziridine moieties are able to bind and inactivate bacteriophage MS2, herpes simplex virus HSV-1, nonenveloped infectious pancreatic necrosis virus (IPNV), and enveloped viral hemorrhagic septicaemia virus (VHSV). The virus-particle complexes can be efficiently removed from the aqueous milieu by simple magnetocollection.     

Synthesis of nonspherical superparamagnetic particles: in situ coprecipitation of magnetic nanoparticles in microgels prepared by stop-flow lithography

We present the synthesis of nonspherical magnetic microparticles with multiple functionalities, shapes, and chemistries. Particle synthesis was performed in two steps: polymeric microparticles functionalized homogenously with carboxyl groups were generated using stop-flow lithography, and then in situ coprecipitation was used to grow magnetic nanoparticles at these carboxyl sites. With successive growth of magnetic nanoparticles, we obtained polymeric particles with saturation magnetizations of up to 42 emu/g microparticle. The growth in the magnetic nanoparticle mean size and polydispersity was determined from the magnetization curves obtained following each growth cycle; nanoparticle sizes were limited by the physical constraint of the effective mesh within the hosting gel microparticle. Particles with spatially segregated domains of varying magnetic properties (e.g., Janus particles, particles with step changes in magnetite concentration, etc.) can be synthesized readily using this approach.